Mac OS is not a supported Operating System Product Line/s: Back-UPS PowerChute Personal Edition Environment: Mac OS X attached to APC Back-UPS via USB cable Cause: PowerChute Personal Edition software provides safe system shutdown in the event of an extended power outage and provides potential data corruptions. Mac OS has this option available. Apc Powerchute Download; Apc Personal Download; Apc Sdk; Visio Apc; Apc Omnipass. Palm, Not Applicable, Unix, Linux, Windows Tablet PC Edition 2005, Windows Media Center Edition 2005, Linux Open Source, Mac PPC, Mac OS X 10.5, Mac OS X 10.4, Mac OS X 10.3, Mac OS X 10.2, Mac OS X 10.1, Mac OS 9, MAC 68k, Mac OS X 10.6, Mac OS X 10.7, Mac OS. APC has expanded its family of power management software with the introduction of PowerChute® Personal Edition for the Mac OS X operating system. This easy-to-use, safe system shutdown software has sophisticated power management functions and is the ideal choice for APC Back-UPS® uninterruptible power supply (UPS) users protecting their Macs. Special thanks to Dennis Wurster for contributing a nicely-equipped Mac Pro to the Apcupsd project. It was instrumental in enabling support for Mac OS X 10.11 “El Capitan”. Many thanks to all who contributed. Please see the ReleaseNotes for a summary of changes and the ChangeLog for a full list of commits. Apc Powerchute For Mac Do you really know how to fully uninstall APC PowerChute 1.3.4 from your Mac? Even though app removal in macOS seems like much easier then conducting uninstall process on Windows operating system, there are still some puzzles and problems while they are trying to uninstall APC PowerChute 1.3.4 on their Macs.
| Click here to return to the 'Use a third-party APC UPS management tool for more control' hint |
Hm, I've been dreading the battery and power failure beeps with my new APC UPSs. But I don't think the consumer models, I have BackUps LS and CS, have the option to control the alert sounds. Previous models I had were BackUps Pros, and I used the Windoze Powerchute in virtualization to turn off the sounds. I did not see any alert sound options for the CS and LS.
A warning about the installer (I like to poke inside strange new installers, especially from open source): it installs things in system locations, /sbin, /etc & /usr/share, when they should be installed in /usr/local/*. Stuff in system locations has the potential to be removed by Apple updaters, and it's good to have 3rd-party software outside the system, especially for ease of uninstalling.
Apc Backup Software Download Powerchute
Why bother? The built-in software (Energy Saver) is good enough.
Never needed anything beyond that. If you wanted, I'm sure AppleScript and/or Automator could be added for more needs.
> Why bother?
Maybe for the reason described in the first paragraph of colinng's hint? I've used apcupsd precisely for that purpose.
> The built-in software (Energy Saver) is good enough. Never needed anything beyond that.
Good (enough) for you.
> If you wanted, I'm sure AppleScript and/or Automator could be added for more needs.
Do you a specific method to suggest for disabling APC UPS beeps instead of simply a think-you-know-better response?
Thanks for writing up this hint, colinng. Hopefully a few folks will appreciate it.
> Thanks for writing up this hint, colinng. Hopefully a few folks will appreciate it.
D'oh! I just accidentally gave it a 1- instead of 5-star vote… sorry.
Does the built-in monitor more than one UPS? Does it send email notifications?
What a strange comment. Clearly there is value in silencing the beeping noise- I'm going to have mine mute during the night.
I'm going to have mine mute during the night.Minimally, I think that would require a script to interact with apctest to enable/disable beeping using the '6) View/Change alarm behavior' item (shown in the list thwaite posted) or similar. Then cron (for instance) could be used to run that script, with an enable or disable option, at desired intervals.
Setting BEEPSTATE to 'N' (or other values) in apcupsd.conf doesn't apparent to have any effect on the alarm, at least not that I could determine with some brief testing this morning.
I always realize there's a power outage when I'm on/near my home systems and awake to possibly take action. Plus now there's less intrusive Growl notification. And I normally don't want/need to care about outages while asleep. So, I used apctest to change the alarm behavior to unconditionally never beep since there's no reason for it in this context.
This is a useful utility, and the author’s reasons are good: APC software doesn’t give full control even for beeps, much less for network notifications (tho I don’t use these). Don’t expect AppleScript or Automator would expand it.
More usefully, I’ll report:
* the utility works fine on my “ICBM” (heh), a late ‘09 iMac. I finally got a UPS just for it, APC’s BE750G and was annoyed by APC’s limited controls, tho happy that OSX itself does the basic controls nicely (aside: regret that I read the macintouch writer Robert Mohn’s recommendation for iDowell’s iBox and iPack UPS's only later, tho they cost at least twice as much: macintouch.com/reviews/idowell )
* the installer for apcusd is simple, but doesn’t warn that a reboot will be required to complete the install. It does open TextEdit to display two windows, one with the apcupsd.conf file, the other with a notice that you have to edit this configuration file for your specific UPS and should do this before agreeing to the installer's request to reboot. You might be able to skip this step but should read through the config file now to ensure its default settings match your situation. And you’ll need to later edit this .conf file if you want to add network reporting, which can’t be set up using only the simple CLI menu.
* This config file is at /private/etc/apcupsd/apcupsd.conf. But its permissions are read-only so you can't save changes using TextEdit, which doesn't allow superuser override. Solution: use the Terminal (which you'll have to use anyway for their CLI menu). Navigate to the directory and sudo-launch your favorite CLI text editor (vim, pico, etc).
Having a little Unix knowledge, I lived dangerously and edited various parameters as suggested by their comments. Recall that lines prefaced by # are comments, often useful example settings; but for functional parameter specifications you must remove the #.
* After rebooting, the CLI menu allows for the following choices:
1) Test kill UPS power
2) Perform self-test
3) Read last self-test result
4) View/Change battery date
5) View manufacturing date
6) View/Change alarm behavior
7) View/Change sensitivity
8) View/Change low transfer voltage
9) View/Change high transfer voltage
10) Perform battery calibration
11) Test alarm
12) View/Change self-test interval
Q) Quit
I’ve not yet tried #1 or #10, but the others work as expected.
Another great feature of apcupsd is that you can install it on more than one machine, and each can communicate with the other. If you have several machines that are powered from the same battery, you can set up apcupsd to shut all of the machines down gracefully before the battery runs out. You can also do lots of other cool things, limited only by your imagination.
For instance, I have two Mac minis in my server closet, and when power goes out and the battery is almost out of juice, on each machine, apcupsd quits all user-space applications (with an Applescript run through the 'osascript' command-line tool, schedules a 'wakeorpoweron' event with the power manager so the machine will reboot once power is restored, and then shuts the system down.
The software also works fine with Intel-based Macs.
APC make good UPSs but their Mac software stinks (to put it mildly).
While their wilful neglect of Macs in terms of software provision might have been justified the many years ago when the Mac market was in serious decline, the massive increase in Mac share in more recent years has led other more sensible companies to resume providing decent Mac support. Even Microsoft have improved their Mac support :)
People might also be interested in the open-source NUTS project (Network Ups ToolS), see http://www.networkupstools.org/ and http://boxster.ghz.cc/projects/nut/wiki/NutOnMacOSX this will work with other makes as well as APC.
Not working in 10.6.2 on an Intel 2.66Ghz 8-core.
I ran 'sudo /Library/StartupItems/apcupsd/apcupsd stop'
I still get this:
2010-03-19 04:28:11 apctest 3.14.8 (16 January 2010) darwin
Checking configuration ...
Attached to driver: usb
sharenet.type = DISABLE
cable.type = USB_CABLE
You are using a USB cable type, so I'm entering USB test mode
mode.type = USB_UPS
Setting up the port ...
apctest FATAL ERROR in generic-usb.c at line 636
Cannot find UPS device --
For a link to detailed USB trouble shooting information,
please see <http://www.apcupsd.com/support.html>.
apctest error termination completed
Any ideas?
- Was there any output from running:
sudo /Library/StartupItems/apcupsd/apcupsd stop
If successful, it should be:
Shutting down UPS monitoring
- Try running this:
ps acx | grep apcupsd
No output if apcupsd isn't running. Otherwise, it'll look similar to:
105 ?? Ss 1:10.01 apcupsd
What to suggest next depends on the results.
Are you running your intel chip with OSX's 64-bit kernel? I get your error msg with 64bit though it works fine for me with 32-bit. Hmph.
My system log shows this during the boot:
Mar 19 12:15:04 RG-iMac com.apple.SystemStarter[47]: Starting UPS monitoring
Mar 19 12:15:04 RG-iMac apcupsd[96]: Valid lock file for pid=86, but not ours pid=96
Mar 19 12:15:05 RG-iMac configd[15]: network configuration changed.
Mar 19 12:15:05 RG-iMac apcupsd[97]: apcupsd FATAL ERROR in generic-usb.c at line 636...
Mar 19 12:15:05 RG-iMac apcupsd[97]: Valid lock file for pid=86, but not ours pid=97
Mar 19 12:15:05 RG-iMac apcupsd[97]: apcupsd error shutdown completed
I've not time to follow up on this just now.
Yep, running in 64-bit...
Ah well :-)
Since I didn't see it mentioned in the other posts, I thought I'd add that the apcupsd installer places an application--apcupsd.app--in the /Applications folder.
When launched, no dock icon or interface window will open. Instead, your only indication that it is running is the appearance in the menubar of a generic UPS icon. Should a connection failure occur, the icon will acquire a superimposed red '?', and hovering the mouse over the icon will reveal the tooltip 'NETWORK ERROR'. Clicking on the icon reveals the available interface options.
The GUI's available functions are pretty much limited to status and event monitoring, and provide no equivalent for issuing the CLI commands. It is handy, though, in that it provides the ability, via the preferences settings, to add additional monitors for multiple networked devices, and to turn Growl notifications on and off for them.
Just in case someone else is having the same difficulties I encountered, take a look at your UPS cases.
The battery backup I couldn't get apcupsd to find--among the several it did find--was labeled 'Belkin.'
D'Oh! <forehead slap>
The NUTS software I referred to in a previous comment, does support various Belkin models as well as APC models (and others).
See http://www.networkupstools.org/compat/stable.html
I don't think this utility is ready for primetime. I installed it and decided to uninstall it. Dragged it to the trash, found the startup item, dragged that to the trash, emptied the trash, and rebooted. Now my UPS no longer shows up in Energy Saver under System Preferences!
It says in the documentation that a dummy kernel extension is installed to prevent OS X from recognizing the UPS, but darned if I can find it. Help, please!
Just had the same problem. You need to go to terminal and run sudo /sbin/apcupsd-uninstall. This will get rid of all the related code. Reboot and your APC should show up in energy saver again.
Apc Powerchute Download
Ear Recognition System V3 : Test The Last Updated Version For Biometric Ear Recognition,Novel Technique Implemented For Identification Using the Shape of The Ear. Our Team Developed a Hypride and Fast Algorithm For Ear Recognition Based On Principal Component Analysis That Is Capable To Recognize Ears With an incredible 99.6 percent success rate.
- Ear-Recognition-system-v31.zip
- Biometric Recognition Code
- Freeware (Free)
- 9.07 Mb
- WinXP, WinVista, WinVista x64, Win7 x32, Win7 x64, Win2000, WinOther, Other, Mac OS X, Mac Other, Windows2000, Windows2003, WinServer, Windows Vista, WinMobile, Windows CE, Pocket PC, Android, BlackBerry, iPhone, iPod, iTouch, Palm, Palm OS 6.0, Not Applicable, Win98, WinME, WinNT 3.x, WinNT 4.x, Win95, Unix, Linux, Handheld, Mobile Other, Java, Win 3.1x, Windows Tablet PC Edition 2005, Windows Media Center Edition 2005, Windows Mobile 2003, Windows Mobile 2005, Linux Console, Linux Gnome, Linux GPL, Linux Open Source, MS-DOS, AS, 400
Fingerprint authentication, network support, more detailed reports, QuickBooks® integration, door access control, plus quick and easy setup; make Biometric Employee Time Clock 4.0 the most powerful time and attendance solution to stop time. ...
- setup-biopunchclock.exe
- Veritask, LLC.
- Shareware ($149.00)
- 14.36 Mb
- Win98, Windows2000, WinXP, Windows2003
Universal Biometric driver is designed to communicate PayPunch software with different types of biometric devices and data transferring to PayPunch Universal Biometric driver is designed to communicate PayPunch software with different types of biometric devices and data transferring to PayPunch database..
- UBD_Setup.exe
- Xpress Software Inc.
- Shareware ($199.99)
- 3.25 Mb
- Win95, Win98, WinME, WinNT 4.x, WinXP, Windows2000, Windows2003
The three main functions of the APC Shutdown Manager software are: 1. to provide information on the current state of your UPS 2. to allow you to configure the operation of your UPS 3. most importantly, to save your open files when the UPS battery. ...
- asm_v1.0.1.hqx
- American Power Conversion
- Freeware (Free)
- 1.2 Mb
- Mac OS 9.2.2
APC Powerchute is a safe system shutdown software with sophisticated power management functions, and is the ideal choice for home APC Battery Backup users. Enhancements: - Added support for Intel-based. ...
- PowerChutePE_v1.3.4.dmg.tgz
- American Power Conversion
- Freeware (Free)
- 292 Kb
- Mac OS X 10.4.4 or higher
Biometric HP Manager 6.12.44 is a smart and convenient software with which you can easily handle all of your Handpunch devices in seconds. Backup, Restore, Synchronize, Date and Time Setup, Bell Schedules, Device Calibration, User Enrollment, and. ...
- Biometric HP Manager
- Xpress Software Inc.
- Trial ($199.99)
- 3.3 Mb
- Windows 95, Windows Me, Windows XP, Windows 2
BioCert ® Biometric Authenticator Lite Edition – 10 UsersOur standard software programming toolkit offers 1:m matching capability up to 10 users.This toolkit is primarily focused upon students and learning programmers that wish to explore the. ...
- BioCertLite.zip
- Biometrics Direct
- Freeware (Free)
- 10 Kb
- Win98, WinNT 4.x, WinXP, Windows2000
APC Biopod is a usb fingerprint sensor. This project provides linux driver for this device. Check http://www.
- APC Biopod Linux Driver
- Florent Garcin
- Freeware (Free)
- Windows
Process control is of continously increasing importance in many industries. apc-gs68 is intended to provide a framework to test, compare and develop related algorithms easily..
- GS68-APC
- gs68.de
- Freeware (Free)
- Windows
The purpose of this project is to provide a biometric security solution by using voice print, fingerprint and/or facial recognition along with a password and/or smart card support using AES to protect data. Please read forums for if interested.
- Kainoa Biometric UserAuthentication
- Deryck
- Freeware (Free)
- Windows
Biometrics is the use of finger, face or voice verification to identify a person. my-iWallet is an innovative application using Biometrics to log securely onto Web Sites as a Password Manager by simply Scanning your finger face voice or Biosmartcard. ...
- myiwallet_installer.exe
- Cordian Corp
- Shareware ($22.95)
- 32 Mb
- WinXP, WinVista, Win7 x32, Win2000, Windows2000, Windows2003, Windows Vista, Windows Tablet PC
Biometrics is the use of a personal trait such as finger or face, voice or iris recognition to identify a person. my-iWallet is a uniquely secure and innovative application, the first to utilize Biometrics in this way, enabling you to log on to Web. ...
- myiWallet_Installer.exe
- Cordian Corp
- Shareware ($29.00)
- 32.74 Mb
- WinXP, WinVista, Win7 x32, Win2000, Windows2000, Windows2003, WinServer, Windows Vista
Related:Apc Biometric - Apc Snmp - Visio Apc - Apc Sdk - Apc Omnipass
